D I S P A T C H A N D S T O R A G E
1.4.2 Handling by crane
• As shown in Fig.1.4.2.1, fasten one lifting
bracket each to the left and right of the roof
section and U shape parts of the panel module,
using two M12 X 30 cheese-headscrews with
dished washers & nuts and three M8 dished
washer & nuts in each case.
• Attach suspension ropes of a sufficient load
bearing capacity (see section 11, Technical data,
for the panel weights) and sufficient length to
the lifting brackets using shackles thread the
suspension ropes through the cutouts in the
rope guides. The ABB scope of supply does not
include suspension ropes and shackles.
—
Fig. 1.4.2.1: Preparing a
Lifting brackets
panel for handling by
crane
—
Fig. 1.4.2.1
M12x30 cheese-head screw
with dished washers & nut
M8 dished washers & Nuts
9