List Of Tools - ABB PrimeGear ZX0 Product Manual

Gas-insulated medium voltage switchgear
Hide thumbs Also See for PrimeGear ZX0:
Table of Contents

Advertisement

68
P ri m eG ear Z X 0 P R O D U C T M A N U A L

9. List of tools

The tools required for assembly of the switchgear
system are detailed in the list below. Tools are not
part of the ABB scope of supply.
All the tools listed must comply with the safety
regulations of the country concerned.
1 Temperature-compensated gas density
manometer with coupling, for systems up to
24 kV, not for panels with switch-disconnector
and fuses (ABB part number: 1VB8004775R0101,
Fig.2.3.1.1.4)
1 Temperature-compensated gas density
manometer with coupling, for systems with a
rated voltage over 24 kV and up to 36 kV and for
panels with switch-disconnector and fuses (up
to 24 kV) (ABB part number: 1VB8004775R0102,
Fig.2.3.1.1.4)
1 Set of open-ended spanners, 8 to 19 mm AF
1 Set of ring spanners, 8 to 19 mm AF
1 Ratchet, 3/8", with extensions and 8 to 19 mm
AF socket keys and 4 to 10 mm Allen key inserts
1 Ratchet, ½", with extensions and 10 to 19 mm
AF socket keys and 4 to 10 mm Allen key inserts
1 Socket insert ½", 19 mm AF, min. 82 mm long
(for busbar installation, busbar current 1250 A)
1 Socket insert ½", 24 mm AF, min. 82 mm long
(for busbar installation, busbar current 2500 A)
1 Set of screwdrivers for slotted and crosshead
screws, sizes 1 to 3
1 Set of electrician's pliers (end cutting nipper,
pointed pliers, flat end pliers, stripping tongs)
1 Rubber mallet
1 Set of fitter's hammers
1 Leveler
1 Plumb bob
1 Guide string
1 Scribing iron
1 Punch
1 Tri-square
1 Tape measure
1 Calliper gauge
1 Continuity tester
1 Multimeter (voltage, current and resistance)
1 Torque wrench, 0 – 40 Nm, calibrated
1 Torque wrench, 15 – 100 Nm, calibrated
1 Extension cable, 230 V, 15 m long 1 Cable drum,
230 V/16 A, 50 m
1 Angle grinder, small
1 Hand-held drill, chuck up to 13 mm
1 Hammer drill
1 Welding machine + accessories
1 Set of steel drill bits, 1 to 13 mm
1 Set of concrete drill bits, 6 to 12 mm
1 Steps, 8 rung
2 Trolley jacks (recommended capacity 2 t) or
2 Hydraulic lift trolleys (recommended capacity
3.5 t per pair)
4 Lifting ropes, 0.75 m, recommended capacity 1 t
4 Lifting ropes, 1.5 m, recommended capacity 1 t
4 Shackles, capacity 1 t
2 Pinch bars
5 Handling tubes
2 Chain hoists, 0.25 t including chain
1 Site lighting
1 Torch
1 Hand-held lamp
1 Vacuum cleaner
Several wooden planks
Several wooden beams
Soft, non-fraying cleaning cloth, household
cleaner, chlorine-free

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents