Disassembly And Replacement; Preparing For Disassembly; Disassembling The Digital Axis Control; Preparing The Components For Storage/Further Use - Bosch Rexroth VT-HNC100 3X Series Operating Instructions Manual

RE 30139-B/12.14 | VT-HNC100...X

10 Disassembly and replacement

10.1 Preparing for disassembly

NOTE
The device might be destroyed!
Decommission the entire system as described in the overall system manual.
f
De-energize the device and all connected components.
f

10.2 Disassembling the digital axis control

Proceed as follows to disassemble the VT-HNC100...3X:
Pull off the connection lines and plugs.
f
Release the VT-HNC100...3X from the top hat rail.
f
Press down
Fig. 23: VT-HNC100...3X disassembly from the top hat rail

10.3 Preparing the components for storage/further use

Proceed as follows in order to prepare the VT-HNC100...3X for storage and
further use:
Only use the geniune packaging for storage.
f
Observe the admissible storage temperature range that is specified in
f
RE 30139.
Protect against dust and humidity.
f
Bosch Rexroth AG 43/48
Disassembly and replacement
Apply pressure and
tilt out top down.