4/48
Bosch Rexroth AG
About this document
1
About this document
1.1
Validity of the documentation
This documentation is applicable for the digital axis controls
VT-HNC100-...-3X/C..., VT-HNC100-...-3X/P..., VT-HNC100-...-3X/N... and
VT-HNC100-...-3X/E... of the VT-HNC100 product family of the 3X/... series. .
For the precise identification of the products see chapter 4.3 "Identification of the
product" on page 13.
This documentation is intended for assembly fitters, operators and service
technicians and plant operators.
This documentation contains important information on the safe and appropriate
assembly, transport, electrical connection, commissioning, operation, use,
maintenance, disassembly and simple troubleshooting of the product.
You should read this documentation thoroughly, and in particular the chapter
f
"Safety instructions" before working with the product.
1.2
Additional documentation
Documentations marked with the book symbol
before handling the product and must be complied with:
Table 1:
Title
Digital axis control
VT-HNC100...3X
Declaration on the environmental
compatibility for EMC, climate and
mechanical load
Online help in the commissioning
software
WIN-PED® 6 and/or WIN-PED® 7
"First steps" towards WIN-PED
General product information on
hydraulic products
VT-HNC100...3X | RE 30139-B/12.14
must be available for you
Document number
Document type
RE 30139
Technical data sheet
Available on the
Internet under
boschrexroth.
com
RE 30139-U
Environmental
statement
Available on the
Internet under
boschrexroth.
com
Available on the
Internet under
boschrexroth.
com/hnc100
Available on the
Internet under
boschrexroth.
com/hnc100
RE 07008
Available on the
Internet under
boschrexroth.
com
www.
www.
www.
www.
www.