Disassembly And Replacement - Bosch Rexroth IMpnio Manual

3 609 929 B64/2008-05 | IMpnio
11

Disassembly and replacement

Required tools
• TX9 screwdriver
Disassembling
CAUTION
Disconnecting the IMpnio
interface module while under
voltage
Damage to the IMpnio interface
module!
y
Make sure the relevant system
component is not under
voltage before removing the
IMpnio interface module.
Fig. 4: Releasing the lock
1 Lock
Proceed as follows to disassemble the
IMpnio interface module:
1. Make sure the relevant system
components are not under voltage.
2. Loosen the front torx screws. The IMpnio
interface module may only be removed
once the lock has been completely
released (see Fig. 4).
3. Assemble a dummy panel, if necessary.
1
Bosch Rexroth AG 25/84