Table of Contents
Advertisement
RE 30139-B/12.14 | VT-HNC100...X
4
Information on this product
4.1
Performance description
The digital axis control VT-HNC100...3X is a programmable NC control designed
for one to four controlled electro-hydraulic axes. The VT-HNC100...3X can be
connected to a superior control via a bus system (PROFIBUS DP, CANopen
or via the Ethernet-capable bus system PROFINET RT) and programmed
using a PC and the software program WIN-PED® version 6 and higher. The
Ethernet-capable variant requires WIN-PED® 7. TCP/IP is available optionally
to a PROFIBUS DP connection, see order option. Using the VT-HNC100...3X
it is possible to implement the control of position, pressure, force and velocity,
position-dependant braking, alternating control (position/pressure) and the
synchronization control of up to 4 axis, also in groups.
4.2
Product description
The VT-HNC100...3X is designed for being used in rough industrial environments
as regards to interference resistance, mechanical vibration and shock resistance,
and climate resistance.
The VT-HNC100...3X includes freely configurable controller variants:
• Position / pressure / force and velocity controller
• Position-dependent braking
• Alternating control (position/pressure)
• Synchronization control up to 4 axes, also in groups
For parameterization and diagnosis, the PC software WIN-PED® 6 or
WIN-PED® 7 is used which is available as free download for each control type
on the Internet under www.boschrexroth.com/hnc100. This allows for the
individual parameterization of the VT-HNC100...3X and its adjustment to the
requirements of your axes.
The chapter "First steps" describes the first steps when using the PC program
WIN-PED®. This chapter is also available as download on the same Internet site.
For process connection, the VT-HNC100...3X digital axis control is provided with
digital and analog transducer interfaces and up to eleven freely configurable
digital inputs/outputs. A bus system is available for the communication with the
superior control.
When using the unit, you moreover need superior control logics with
corresponding I/O components that in connection with the VT-HNC100...3X are
responsible for the holistic control of the machine's motion sequence and also its
monitoring as regards safety.
Bosch Rexroth AG
11/48
Information on this product
Hide quick links:
Advertisement
Table of Contents
