About This Document; General Safety Instructions - Bosch rexroth VM350 Operating Instructions Manual

3609929B32/2021-09 | VM350
About this document/ General safety instructions
1

About this document

This manual contains important information on
the safe and appropriate assembly, transport,
commissioning, operation, maintenance,
disassembly, and simple troubleshooting of the
VM350 power supply module.
Read these instructions completely, especially
chapter "2 General safety instructions"
on page 26, before working with the VM350
power supply module.
Related documents
The VM350 power supply module is a system
component.
Also observe the instructions for the other system
components.
Also observe the generally applicable, legal or
otherwise binding regulations of European or
national legislation and the rules for the
prevention of accidents and for environmental
protection applicable in your country.
Bosch Rexroth AG
2 General safety
instructions
The VM350 power supply module has been
manufactured according to the accepted rules of
current technology. There is, however, still a
danger of personal injury or damage to
equipment if the following general safety
instructions and the warnings before the steps
contained in these instructions are not complied
with.
• Read these instructions completely and
thoroughly before working with the VM350
power supply module.
• Keep these instructions in a location where
they are accessible to all users at all times.
• Always include the operating instructions
when you pass the VM350 power supply
module on to third parties.
Intended use
The product is exclusively intended for being
integrated in a machine or system or for being
assembled with other components to form a
machine or system. The product may be
commissioned only if it is integrated in the
machine/system for which it is designed and the
machine/system fully complies with the EC
machine directive. Observe the operating
conditions and performance limits specified in
the technical data.
The VM350 power supply module is a work
appliance and not designed for private use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The VM350 power supply module is intended for
installation in the BT356 card rack or SB356
system box. The power supply module provides
the power supply for all the cards in the BT356
card rack or SB356 system box.
25/48