iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
5. Adjust the surveillance angle.
1) Loosen tilt adjusting screw. Tighten the screw after adjusting.
2) Loosen pan adjusting screw. Tighten the screw after adjusting.
6. Adjust zoom and focus level. Refer to
2.4 Mounting with Housing
Before You Start
The shown housing is not included in package. You need to prepare one if you adopt this mounting style.
Also, for housing mounting, you need to prepare suitable brackets in advance.
QSG iDS-2CD7046G0-AP 022321NA
Figure 8, Install Camera to Wall Mount
Tilt Adjusting
Screw
Pan Adjusting
Screw
Figure 9, Adjust Surveillance Angle
Section 2.5
.
12