Zoom And Focus Adjustment; Activate And Access Network Camera - HIKVISION iDS-2CD7046G0-AP Quick Start Manual

iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
4. Adjust zoom and focus. Refer to

2.5 Zoom and Focus Adjustment

Steps
1. Power on the camera.
2. Connect the video out interface of the camera to the installation display device.
3. Adjust zoom and focus.
•
For certain camera models, zoom and focus must be manually adjusted via zoom/focus lever
according to the image on the display device.
NOTE: For a camera equipped with auto iris, it is suggested you change the iris mode to manual from
the camera menu (accessed via Web browser), and re-change it back to auto iris after you
adjust the focus by the focus lever.
•
For a camera equipped with a motor-driven lens, adjust the zoom and focus on the PTZ
control panel by visiting the camera via a Web browser or client software.
4. (Optional) For the camera supports ABF, you can adjust the focus manually, or click the ABF
button on the rear panel of the camera to adjust the focus automatically.

3 Activate and Access Network Camera

Scan the following QR code to display the Activate and Visit Network Camera prompt. Note that mobile data
charges may apply if Wi-Fi is unavailable.
QSG iDS-2CD7046G0-AP 022321NA
Section 2.5
.
20