HIKVISION iDS-2CD7046G0-AP Quick Start Manual page 15

iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
3) Install the bracket onto the wall/ceiling/pole. The wall mounting bracket, pole mounting bracket,
and the pendent bracket are shown in the figures below.
4) Fix the housing (with camera) onto the bracket with the supplied screws.
5) Loosen the adjusting screw to adjust the surveillance angle of the camera. Tighten the screw after
adjustment.
QSG iDS-2CD7046G0-AP 022321NA
Figure 13, Install the Bracket to Mounting Place (1)
Figure 14, Install the Bracket to Mounting Place (2)
Figure 15, Fix the Housing to Brackets (1)
15