Table of Contents
Advertisement
iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
2.3.3 Mounting Type I Housing
Steps
1. Screw the camera to housing mounting plate.
2.
Screw the mounting plate together with the camera back to the housing.
NOTE:
Push the camera as close to the window as possible.
Window
3. Connect and route cables through the cable outlet of the housing.
1) For network, alarm input and output, and audio input and output, plug corresponding plugs to the
rear panel of the camera. See Figure 1-1.
2) For power supply and RS-485, see the following figure.
QSG iDS-2CD7046G0-AP 022321NA
Figure 10, Install Camera to Mounting Plate
Figure 11, Install Camera to Housing
Cable Outlet
13
Advertisement
Table of Contents
