StarTech.com ARMPIVOTB2 User Manual page 14

Use a Phillips Screwdriver (not included) to remove the
2.
Screw from the Plate on the C-Clamp.
Remove the Plate, Two Washers, and the Knob from the
3.
bottom of the C-Clamp.
Position the Support Pole over the Grommet Hole.
4.
Slide the Plate (removed in step 3) through the Threaded
5.
Rod on the Knob.
Place the Knob through the Grommet Hole in the desk or
6.
table and into the Support Pole.
Turn the Knob clockwise to tighten it.
7.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Removing the Plate from the C-Clamp
13