Table of Contents
Advertisement
NL
appliance door
:
Warning – Risk of injury!
Certain parts in the appliance door may have
sharp edges. Carry
safety gloves.
Insert appliance door
Reinstall the appliance door in the reverse order.
When inserting the appliance door, make sure that
1.
both hinges are guided straight into the opening
(Fig. !).
Place both hinges against the underside of the outer
pane and use them for the guide. Make sure that the
hinges are slid into the correct opening. This should
be easy, without noticeable resistance. If you feel
resistance, check that the hinges are pushed into the
correct opening.
Open the appliance door completely. Close
2.
both locking levers again (Fig. ").
Close the interior door.
3.
20
Remove door shield
The stainless steel insert in the door shield can
discolour. To clean the door thoroughly, you can
remove the cover. ~" Cleaning" on page 16
Open the appliance door slightly.
1.
Press left and right on the cover (Fig. !).
2.
Remove the cover (Fig. "). Carefully
3.
close the appliance door.
Note:
Clean the stainless steel insert in the cover
with a stainless steel agent. Clean the rest of the
door shield with warm soapy water and a soft
cloth.
Open the appliance door slightly again. Place the
4.
cover and press it on until you hear it click into place
(Fig. #).
Close appliance door.
5.
Removing and installing door windows
To make them easier to clean, you can remove the glass
from the appliance door.
:
Warning
Risk of injury!
If there are scratches on the glass of the
■
appliance door, it can jump. No scraper,
sharp or abrasive
use cleaning agents.
When opening and closing the appliance door
■
R
risk of injury!
the hinges move and can get stuck. Do not reach
the hinges with your hands.
Certain parts in the appliance door may
■
R
risk of injury!
have sharp edges. Wear safety
gloves.
Advertisement
Table of Contents
