Table of Contents
Advertisement
NL
Time functions
a
With key
or @ set the time.
3.
After a few seconds, the device starts to heat up. The
time counts down in the display.
The time has elapsed
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Change and abort
a
With key
or @ you can change the duration at any
time. The change is accepted after a few seconds.
To cancel the operation, set the cooking time with the
all the way back to zero. The appliance continues to heat
up without any time.
Set end
You can set the time at which the time expires to a later
time. For example, you can place the food in the cooking
compartment in the morning and set it so that it is ready
in the afternoon.
Clues
Make sure that food does not remain in the cooking
■
compartment for too long and that it does not spoil.
Do not set an end if the operation has already
■
started. The cooking result would then no longer be
correct.
The end of the time can be delayed up to 23 hours and
59 minutes.
Example in the picture: It is 10:30 am, the set time is 45
minutes and the dish must be ready at 12:30 pm.
Small deviations from the image are possible.
Set the type of heating and temperature or
1.
setting.
v
Press twice
touch and with button
2.
time.
14
a
a
or @ set the
v
Again on the test
tip. The display shows the
3.
y
end time
marked.
With the @ or . button
4.
time.
After a few seconds, the device takes over the settings.
The display shows the end time. As soon as the device
starts, the time will elapse.
The time has elapsed
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Change and abort
a
With the key
or @ you can change the end time. The
change is accepted after a few seconds. The end time
cannot be changed when the time expires. The cooking
result would then no longer be correct.
To cancel the program, use the . button to set
the end time all the way back to the current time plus
duration. The appliance starts to heat up and the time
counts down.
Set alarm clock
You can use the alarm clock when the device is turned
on and off. However, no duration or end time may be
set.
You can set a maximum of 23 hours and 59 minutes. Up
to 10 minutes, the alarm time can be set in steps of 30
seconds. After this, the time steps become larger, the
higher the value.
a
put the end at a later
a
Advertisement
Table of Contents
