Siemens HB373AB.0 Instructions Manual page 21

Remove from the device
Open the appliance door slightly.
1.
Press left and right on the cover (Fig. !).
2.
Remove shield (Fig. ").
3.
Loosen and remove the screws on the left and right
4.
of the appliance door (Fig. #).
Before closing the door again, clamp a folded
5.
dishcloth (Fig. $).
Pull out the glass at the front upwards and place on
an even surface with the door handle downwards.
Press the two holders of the central pane upwards, do
6.
not remove them (Fig. %). Hold the diamond with one
hand. Remove the window.
Clean the windows with glass cleaner and a soft cloth.
Insertion into the device
When installing the center pane, make sure that the
arrow is located at the top right of the pane and
matches the arrow on the plate.
Insert the center pane into the bottom of the holder
1.
(Fig. !) and press on the top.
Press both holders down (Fig. ").
2.
Guide the front pane into the lower brackets (Fig. #).
3.
Close the front window until the two top hooks are
4.
opposite the opening (Fig. $).
Press against the underside of the front glass until it
5.
audibly locks (Fig. %).
Open the appliance door slightly again and remove the
6.
dishcloth.
Retighten the two screws on the left and
7.
right.
Place the cover and press it down until it clicks
8.
audibly (Fig. &).
Close appliance door.
9.
Attention!
Do not use the interior again until the windows have
been opened properly.
NL
appliance door
21