Time; Child Lock; Activate And Deactivate; Basic Settings - Siemens HB373AB.0 Instructions Manual

Build-in oven
Table of Contents

Advertisement

Depending on the button you touch first, the alarm time
starts at a different suggested value: 5 minutes at the .
a
button
and 10 minutes at the @ button.
v
on test
touch to the alarm clock symbol
1.
is marked.
a
With key
or @ set the alarm time. The
2.
alarm time starts after a few seconds.
Tip:
If the set alarm time applies to the running time of
the device, use the duration. The device then switches
off automatically.
Alarm clock has ended
A signal sounds. The display shows the alarm time at
zero.
Switch off the alarm with any key.
Change and abort
a
With key
or @ you can change the alarm time at any
time. The change is accepted after a few seconds.
To cancel the programme, set with the
time all the way back to zero. The alarm clock is turned
off.
Change time
You can change the time again if necessary, eg from summer to
winter time.
To do this, when the device is switched off, press the
until the symbol for the time is highlighted and with
a
the
or @ change the time.
a Child lock
To prevent children from accidentally switching

Child lock

on the device or changing settings, it is equipped
with a child lock.
Clues
In the basic settings you can specify whether
the Child Lock function can be set.
~" Basic settings" on page 15
A possibly connected hob is not affected because
the oven is equipped with a child lock.

Activate and deactivate

To activate the child lock, the function
selector must be in the zero position.
Press the ' button for approx. 4 seconds.
The symbol for this appears on the display. The
child lock is activated.
Note:
When there is an alarm time
to run. The alarm time cannot be changed as long as the
child lock is active.
Q
a
the alarm
v
V
is set, it continues
To deactivate it, press the ' button again for approx. 4
seconds until the symbol disappears from the display.
Q Basic settings
Various settings are available to operate your
Bas isi ns t el li ngen
device optimally and easily. You can now change these
settings to your liking:

List of basic settings

Depending on the version of your device, not all basic
settings are available.
Basic setting
™‚
Signal duration after expiry
of a time duration or alarm clock

time

™ƒ
Waiting time until a setting
ling has been taken over
™„
Key signal when tapping
of a test
™...
Brightness of the display
lighting
™†
Time indication
™‡
Activating child lock possible
™ˆ
Interior lighting
during use
™‰
Run-on time of the cooling fan
short tor
™Š
Telescopic rails retrofitted
fold** pull-out system)
™'
All values to factory
setting
* Factory setting (depending on the device type, the factory
settings may differ)
** Not available on all devices.
- - - - - - - -
Child lock
Choise
=
approx. 10 seconds
=
approx. 30 seconds*
„ =
approx. 2 minutes
=
approx. 3 seconds*
=
approx. 6 seconds
„ =
approx. 10 seconds
=
out
=
at*
=
dark
=
average
„ =
bright*
=
time display off
=
time display on*
=
new
=
Yes*
=
yes, with door
lock**
=
new
=
Yes*
=
=
average*
„ =
long
... =
extra long
=
no* (for racks and 1-
=
yes (with 2- and 3-way pull-
out system)
=
no* reset
=
Yes
NL
15

Advertisement

Table of Contents
loading

Table of Contents