Table of Contents
Advertisement
Program
06
Pot roast
07
beef roulade
08
Leg of lamb, well done
09
roast veal,
thin
10
Roast pork neck
Program Set
The appliance selects the optimal heating method and
the time and temperature setting. You just need to set
the weight.
The weight can only be set in the respective
weight range.
The function selector on Programs
1.
temperature selector remains in the zero position.
With the @ or . button
2.
h
On the key
tip.
3.
With the @ or . button
4.
dish.
After the weight has been taken over, the calculated
duration appears on the display. With key
back to the program as you wish.
The program will start after a few seconds. The time counts
down on the display.
When the program is finished, a signal sounds. The
display shows the duration at zero.
If you are satisfied with the cooking result, switch the
appliance off by turning the function selector knob to
the zero position.
Duration of the program
The duration of the set program is automatically
calculated by the appliance. It appears after you
have set the weight for the selected program.
You cannot change the duration of the program.
check
As soon as the program and the signal have ended, you
can set a cooking time using the @ button. The appliance
continues to heat up with the settings of the program.
Note:
You can check as often as you want.
Form
Foodstuff
e.g. brisket,
casserole
shoulder piece, fri- with
lid candeau or
cooked meat
filled with
casserole
with a lid
vegetables or meat
boneless,
casserole
with a lid
seasoned
e.g. sirloin or
casserole
with a lid
fricandeau
boneless,
casserole
with glasses
seasoned
lid
X
to make. The
a
set the desired program.
a
set the weight of your
h
you can go
Add liquid
slide-in
height
2
Meat with liquid
cover
2
Cover meat rolls
e.g. with stock or
water
2
Cover the bottom of the
roasting pan, if necessary
add flour to 250 g
vegetables
2
Cover the bottom of the
roasting pan, if necessary
add flour to 250 g
vegetables
2
Cover the bottom of the
roasting pan, if necessary
add flour to 250 g
vegetables
If you are satisfied with the cooking result, switch the
appliance off by turning the function selector knob to
the zero position.
Set the end time to a later time
With some programs you can set the end time to a later
time. Press key before start
symbol is highlighted in the display. Set the end to a
later time with the @ button.
After starting, the device goes into standby mode.
Change and abort
After the start, the program number and weight
cannot be changed.
The end time can be changed as long as the device is
on hold.
If you want to cancel the programme, switch off the
appliance by turning the function selector knob to the zero
position.
Programs
Clues
Settings
weight
Weight of Do not fry the meat
first
Weight of Do not cook the meat
first- all stuffed roasts
roulades
Weight of Do not fry the meat
first
Weight of Do not fry the meat
first
Weight of Do not fry the meat
first
v
Touch until the end
NL
25
Advertisement
Table of Contents
