Periodic Maintenance Schedule (Bs 500/600/700-Oi) - Wacker Neuson BS 50-4 Repair Manual

Rammer Repair

2.13 Periodic Maintenance Schedule (BS 500/600/700-oi)

Check fuel level.
Inspect air filter. Replace as
needed.
Check engine oil level.
Check ramming system oil level
in sightglass.
Check fuel line and fittings for
cracks or leaks.
Tighten ramming shoe hardware.
Check engine cylinder screws.
Check external hardware.
Clean engine cooling fins.
Clean and check spark plug gap.
Replace spark plug.
Clean recoil starter.
Change ramming system oil.*
Clean engine muffler and
exhaust port.
Inspect crane lifting cable for
wear, damage, or abuse.
Inspect fuel filter. Inspect oil filter.
* Change ramming system oil after first 50 hours of operation.
Note: If engine performance is poor, check, clean, and replace air filter elements as needed.
wc_tx000284gb.fm
After Every
Daily
first week
before
5 or 25
starting
hours hours
21
General
Every Every
month 3 months
or 100 or 300
hours hours
Every
Year