Operating Safety - Wacker Neuson BS 50-4 Repair Manual

Rammer Repair
1.1

Operating Safety

WARNING
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.1.8
1.1.9
1.1.10 ALWAYS read, understand, and follow procedures in the Operator's
1.1.11 ALWAYS be sure that all other persons are at a safe distance from the
1.1.12 ALWAYS be sure operator is familiar with proper safety precautions
1.1.13 ALWAYS wear protective clothing appropriate to the job site when
1.1.14 ALWAYS wear hearing protection when operating equipment.
1.1.15 ALWAYS keep hands, feet, and loose clothing away from moving parts
1.1.16 ALWAYS use common sense and caution when operating the
wc_si000112gb.fm
Familiarity and proper training are required for the safe operation of the
machine. Machines operated improperly or by untrained personnel
can be dangerous. Read the operating instructions contained in both
this manual and the Engine Manual and familiarize yourself with the
location and proper use of all controls. Inexperienced operators should
receive instruction from someone familiar with the machine before
being allowed to operate it.
NEVER operate this machine in applications for which it is not
intended.
NEVER allow anyone to operate this equipment without proper
training. People operating this equipment must be familiar with the
risks and hazards associated with it.
NEVER touch the engine or muffler while the engine is on or
immediately after it has been turned off. These areas get hot and may
cause burns.
NEVER use accessories or attachments that are not recommended by
Wacker. Damage to equipment and injury to the user may result.
NEVER leave the machine running unattended.
NEVER tamper with or disable the function of operating controls.
NEVER use choke to stop engine.
NEVER operate the machine in areas where explosions may occur.
NEVER operate the rammer with the stroke adjusting cover open. The
locking lever rotates rapidly and could catch on skin or clothing,
causing injury.
Manual before attempting to operate the machine.
machine. Stop the machine if people step into the working area of the
machine.
and operation techniques before using machine.
operating the machine.
of the machine.
machine.
Safety Information
9