1
st
groove - hard
5
th
groove - Standard
suspension
position
A
Spring
Distance 'A'
Preload
(in mm)
Standard
Maximum
Minimum
Caution
Do not attempt to over-tight the adjuster bolt, beyond
the maximum and minimum position, to prevent internal
damage.
114
7
th
groove - soft
suspension
Fig. 37
Groove
position
14
5
4
1
19
7
Compression damping force
The compression damping force adjustment is
provided in the right leg only.
To increase the damping turn the adjuster screw
clockwise and to reduce the damping turn the
adjuster screw towards anti-clockwise, as shown.
(ref. Fig. 38)
During adjustment count the numbers of clicks from
fully closed (clockwise) position.
Fig. 38