TVS Apache RR 310 Owner's Manual page 102

Note
If the phone enters battery saver mode, auto-pairing
might not happen. It takes maximum of five minutes
for auto-pairing and it can happen in vehicle running or
engine at idling or engine off condition.
Auto-pairing happens only if the application is locked
in the RAM in multitasking screen of the phone with
manufacture's customized OS (Ex : MI, Vivo etc.)
In case of Android phones with Android OS version
above 8.0, for App to work seamlessly, any battery
optimization setting to be removed in the TVS Connect
App and GPS shall be allowed to run in background in
high accuracy mode.
Even if your phone's Bluetooth is already paired to other
gadgets like smart watch, health band or helmet, the
auto-paring works with your TVS RR310 's connected
instrument cluster.
If the application unfortunately stops due to unforeseen
circumstances, close and reopen the application and do
the manual pairing for the first time, then auto pairing
will happen subsequently.
Note
Once the connected instrument cluster of your TVS
RR310 is connected with your smart phone, the
connected instrument cluster displays Bluetooth '
icon, your mobiles battery level '
providers signal strength '
Incase multiple SIM cards are used in smart phone, by
default, SIM 1's network provider's signal strength is
shown in the display of connected instrument cluster.
Signal strength displayed in connected instrument
cluster might vary from the display in smart phone as
the former is referred from telephonic standards.
'
' icon and network
' icon.
89
89