hilscher netFIELD User Manual page 85

Local Device Manager
netFIELD sensorEDGE | User manual
DOC200601UM01EN | Revision 1 | English | 2021-09 | Released | Public
Unmanaged Interfaces
The Unmanaged Interfaces section lists virtual interfaces and their IP
parameters (IP address, current send/receive volumes).
docker0: Virtual interface ("bridge") of the Standard Docker
·
Iotedge0: Virtual interface ("bridge") of the IoT Edge Docker
·
· vethxxxxxxx: Virtual interface ("virtual Ethernet device") of a container
in a Docker.
· sit0: Tunneling protocol ("Simple Internet Transition") for using IPv6
over an existing IPv4 connection.
Note:
The IP addresses of the "unmanaged interfaces" cannot be
changed by the user.
Network Proxy
The Network Proxy section shows the HTTP/HTTPS/FTP proxy server
settings of your device. Note that the No Proxy URIs localhost and
127.0.0.1 are "internal" destinations in the netFIELD OS and are
therefore not to be addressed via Proxy server. They appear as No Proxy
entries by default, even if you did not configure any Proxy server for your
device. Do not edit or remove localhost and 127.0.0.1 from the No
Proxy list.
To configure your network Proxy settings, click the Edit Proxy button to
open the Proxy Settings dialog. (See section Network Proxy
settings [} page 86] for more information.)
NETWORKING LOGS
The NETWORKING LOGS section lists messages issued by the Network
Manager of the system.
85/166
© Hilscher 2021