Lincoln Electric VRTEX 360 COMPACT Operator's Manual page 45

VRTEX 360 COMPACT
®
BEND TEST
Many welding codes require bend tests as part of the testing required
to qualify welders according to welding procedures specifications
(WPS's). By adding the virtual bend test to the VRTEX, a student can
see what causes a bend test to pass and fail. This functionality also
enhances the instructor tool set by reinforcing classroom instruction
and allows students to pass and fail in a virtual environment before
entering a real welding booth, saving both time and money.
The virtual bend test certificate serves as recognition of a student's
achievement on a certain level in training. The bend test certificate
also adds motivation for the students in their welding training
program.
The BEND TEST application has been implemented to allow the user
to see the results of their weld by simulating the destructive testing
method used in many shops and schools called the Bend Test. The
virtual bend test gives the user instant results of the quality of their
weld by bending the weld 180º. Once the user completes a groove or
pipe weld the BEND TEST option appears in the same location as the
green CONTINUE icon. The user can select this option by pressing the
green BEND TEST icon once the weld is completed.
NOTE: Fillet welds cannot be bent on the VRTEX 360.
Figure 83 – Bend test
SELECTING SAMPLES TO BEND
Select the A or B sample to bend.
CONTINUE icon
becomes BEND
TEST icon upon
completion of
the weld.
36
Figure 84 – Sample A
Figure 85 – Sample B
OPERATION