Lincoln Electric VRTEX 360 COMPACT Operator's Manual page 40

VRTEX 360 COMPACT
®
CUSTOMIZE TOLERANCE LEVELS
The following steps describe the procedure to change tolerances for
the VRTEX:
1. Select Tolerances.
2. Select Create New.
3. Enter a new tolerance name on the keyboard screen.
4. Select Continue.
5. Scroll through "Choose Tolerance Setup" menu to display the
desired tolerance.
6. Select the Select Tolerance icon when the desired name is
displayed in the field.
NOTE: When desired tolerance name is properly selected, that name
will be displayed at the top of the screen next to "Current
Tolerance".
7. Select "Customize".
8. The user selects which configuration to modify. See Figure 66.
Figure 66 – Joint configuration selection screen
9. The user selects which process to modify. See Figure 67.
Figure 67 – Process selection screen
10. The equipment settings screen allows for the modification of the
following welding parameters (See Figure 68):
• Wire Feed Speed
• Amperage
• Voltage
• Polarity
Figure 68 – Equipment settings screen
11. The gas screen allows for the modification of the following
welding parameters (See Figure 69):
• Gas Mixture Selected
• Gas Flow Rate
• Preflow
• Postflow
Figure 69 – Gas screen
31
OPERATION (INSTRUCTOR MODE)