Lincoln Electric VRTEX 360 COMPACT Operator's Manual page 41

VRTEX 360 COMPACT
®
12. The welding technique parameters screen allows the modification
of (See Figure 70):
• CTWD/Arc Length
• Work Angle
• Travel Angle
Figure 70 – Welding technique parameters screen
NOTE: The travel angle for drag welding techniques should always be
less than 90 degrees. The travel angle for pushing technique
should always be greater than 90 degrees.
X
Z
Y
TEE
Figure 72 – Coordinate chart for weld placement (position)
PIPE
13. The pattern & aim screen allows the user to change the type of
pattern being used (stringer, box weave, straight weave, whip,
triangle weave) and the position of the root of the weld. See
Figure 71. The X and Y values change the location of where the
weld bead should be placed. See Figure 72. This affects the
position parameter on the Live Action Student Evaluation Report
(LASER) screen. The +/- determines how far off from the ideal
position the student can place the electrode before it results in a
misplaced weld.
Figure 71 – Pattern & aim screen
X X
32
OPERATION (INSTRUCTOR MODE)
X
Z
GROOVE