Body Solid Powerline PFT50 Owner's Manual page 12

PFT50
STEP 1
BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE
SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware. some components may be pre-assembled.
1A. Attach Left Lower Beam (A) to Base Frame (C) using:
2 - (#20) M10X60mm Hex Head Bolt
4 - (#27) M10 Washer
2 - (#29) M10 Nylon Lock Nut
1B. Attach Right Lower Beam (B) to Base Frame (C) using:
2 - (#20) M10X60mm Hex Head Bolt
4 - (#27) M10 Washer
2 - (#29) M10 Nylon Lock Nut
Note: Bolt #20, M10X60mm, in this step needs to be bottom
up as shown in STEP 1 DRAWING.
12