• Assemble and operate the PDR-282X on a solid, level surface. Locate the unit a few feet from the walls or furniture to provide easy access.
Page 3
PDR-282X: touch up paint. Keep away from children. Set up the PDR-282X on a solid, fl at surface. A smooth, : Obtain assistance! If you feel like you can’t fl at surface under the machine helps keep it level.
PDR-282X HARDWARE ILLUSTRATION Part #1 M8X15mm hex head bolt Qty. 8 Part #2 M8 lock nut Qty. 8 Part #3 50X1.8t end cap Qty. 4 Part #4 50X2.5t end cap Qty. 2...
PDR-282X PART LIST Part A Part B right mainframe left mainframe [1pcs] [1pcs] Part C cross frame [4pcs]...
Page 7
PDR-282X STEP 1 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
Page 9
PDR-282X STEP 2 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
Need help?
Do you have a question about the PDR-282X and is the answer not in the manual?
Questions and answers