Important Notes About Stage 1 - Chauvet Batten 80i User Manual

Important Notes about STAGE 1

RED, GREEN AND BLUE SELECTION
• Channels 1, 2, 3 and 4 control overall intensity of each respective color.
• Channels 1, 2, 3 and 4 can be combined to create an unlimited range of colors.
STROBE
• Channel 7 controls the strobe of channels 2 through 6 only.
• Speed of the strobe is adjustable from 0 to 20 Hz.
MODE SELECTION
• This is accomplished by selecting one of them from the Control Board of the fixtures
directly.
ID ADDRESS SELECTION
• Use channel 10 to select ID addressed fixtures.
• Each independent DMX address can have up to 66 ID addressed fixtures.
• ID address "0" allows control of all fixtures simultaneously.
COLOR MACROS & WHITE BALANCE
• Channel 6 selects the required COLOR MACRO and whites in different colors.
• Channel 6 has priority over channels 2,3,4,5, and 8.
• Channel 1 is sued to control the intensity of the COLOR MACRO.
AUTO
• Channel 8 selects the preset AUTO and CUSTOM programs (1-10).
• Channel 8 has priority over channels 2, 3, 4, & 5.
COLORado™ Batten 80i User Manual 29
5/19/2008 10:40 AM