Important Notes About Dmx Mode 1; Red, Green And Blue Selection; Yellow, Cyan, Purple And White; Strobe - Chauvet COLORado 3 User Manual

Important Notes about DMX Mode 1

R e d , G r e e n a n d B l u e S e l e c t i o n
• Channels 1, 2 and 3 control overall intensity of each respective color.
• Channels 1, 2 and 3 can be combined to create an unlimited range of colors.
• Channels 1, 2 and 3 have priority over Channels 4, 5, 6 and 7.
Y e l l ow , C y a n , P u r p l e a n d W h i t e
• These colors can not be mixed.
• When levels are raised on more than one of these channels, the lowest channel number
will have priority.
S t r o b e
• Strobe occurs at every channel with exception to programs on Channel 9 and 12.
• Speed of the strobe is adjustable from 0 to 20 Hz.
M o d e S e l e c t i o n
• Channel 9 values 5-244 provides mode selection and can only be activated while
Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels
1 through 7 can be any value.
• When Color-Cycle mode 4 is selected channel 11 controls the speed.
I D a d d r e s s s e l e c t i o n
• Use channel 10 to select ID addressed fixtures.
• Each independent DMX address can have up to 66 ID addressed fixtures.
• ID address "0" allows control of all fixtures simultaneously.
M o d u l e s e l e c t i o n
• Provides individual control of the three LED modules in each fixture.
• Channel 11 has priority over channel 12.
E f f e c t m a c r o
• These are pre-programmed color patterns and module chases.
• Channel 12 has priority over channels (1, 2, 3, 4, 5, 6 & 7).
• Channel 12 has priority over channel 11 if first activated.
COLORado™ 3 User Manual 19
Operating Instructions
8/1/2007 10:30 AM