Page 2
CHAUVET®. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders. CHAUVET® owns the content of this User Manual in its entirety, including but not limited Copyright Notice to pictures, logos, trademarks, and resources.
Table of Contents Table of Contents 1. Before You Begin ............................1 What is Included ................................1 Claims ......................................1 Manual Conventions ..................................1 Symbols ....................................... 1 Safety Notes ................................. 2 Personal Safety .................................... 2 Mounting and Rigging .................................. 2 Power and Wiring ..................................
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery. Manual Conventions Convention Meaning 1–512...
· In case of a serious operating problem, stop using this product immediately! In the unlikely event that your CHAUVET® product may require service, contact CHAUVET® Technical Support. LEDs gradually decline in brightness over time, mostly because of heat. Packaged in...
Introduction 2. Introduction COLORdash™ Batten-Quad 12 is a linear wash fixture with 12 individually controllable Description quad-color RGBA LEDs that produce any variation of white, as well as richly saturated colors, due to the inclusion of amber LEDs. It maintains an even pixel pitch when used in multiples, either stacked in an array using the optional CBB6 bracket or lined up end-to- end.
Introduction Overview Front View Power In Power Out 3- and 5-pin DMX In DMX In Fuse Holder Control Panel 3- and 5-pin DMX Out DMX Out Rear View Side View Floor Trunnion Hanging Bracket Adjustment Knob End Cap View COLORdash™ Batten-Quad 12 User Manual Rev. 3...
Introduction Dimensions 3.25 in 3.25 in 2.56 in 2.56 in 3.25 in 3.25 in 82.5 mm 82.5 mm 82.5 mm 65 mm 65 mm 82.5 mm 3.25 in 1.38 in 3.25 in 3.25 in 3.25 in 3.25 in 82.5 mm 82.5 mm 35 mm 82.5 mm...
The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com. Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download Primer from CHAUVET® website: www.chauvetpro.com. COLORdash™ Batten-Quad 12 User Manual Rev. 3...
Always mount this product in a safe position and make sure there is adequate room for Orientation ventilation, configuration, and maintenance. CHAUVET® recommends using the following general guidelines when mounting this Rigging product. · When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4. Operation Control Panel Button Function Exits from the current menu or function Description <MENU> Enables the currently displayed menu or sets the currently <ENTER> selected value in to the current function Navigates upward through the menu list and increases the <UP>...
Operation This setting allows you to choose a particular DMX personality. DMX Personality 1. Go to the Channel main level. 2. Select the desired personality (4 Ch, 6 Ch, 10Ch, 48Ch, or 52Ch). · See the DMX Values section for the highest starting address you can select for each personality.
Operation Auto programs allow for dynamic RGBA color mixing without a DMX controller. Auto Programs 1. Go to Auto main level. 2. Select the desired auto (Auto 0–12). 3. Select Speed. 4. Choose the desired speed value (000–100). You cannot edit any of the auto programs (Auto 0–12). This option allows you to test all the LEDs on the COLORdash™...
Operation This setting determines how fast the output of the COLORdash™ Batten-Quad 12 Dimmer Curves changes when you modify the values of the red, green, blue, amber, and dimmer faders. This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
Operation Menu Map Main Level Programming Levels Description Auto programs Auto 0–12 Auto Speed 0–100 Fade effect in which each color merges to the next Fade Green Blue Amber Green/Blue Red/Blue Red/Green Red/Green/Blue Fix C Red/Amber Green/Amber Static Blue/Amber Red/Green/Amber RG A Red/Blue/Amber R BA...
Operation Menu Map (cont.) Main Level Programming Levels Description Turns off display backlight after 10 sec of inactivity Turns off display backlight after 20 sec of inactivity BackLite Turns off display backlight after 30 sec of inactivity Display backlight always on Turns on all LEDs in sequence for testing Auto Test...
Operation DMX Values 52Ch Channel Function Value Percent/Setting 000 ó 255 0–100% Red 1 000 ó 255 0–100% Green 1 000 ó 255 0–100% Blue 1 000 ó 255 0–100% Amber 1 000 ó 255 0–100% Red 2 000 ó 255 0–100% Green 2 000 ó...
Operation DMX Values (cont.) 52Ch Channel Function Value Percent/Setting (cont.) 000 ó 255 0–100% Red 10 000 ó 255 0–100% Green 10 000 ó 255 0–100% Blue 10 000 ó 255 0–100% Amber 10 000 ó 255 0–100% Red 11 000 ó...
Operation DMX Values (cont.) 48Ch Channel Function Value Percent/Setting (cont.) 000 ó 255 0–100% Red 4 000 ó 255 0–100% Green 4 000 ó 255 0–100% Blue 4 000 ó 255 0–100% Amber 4 000 ó 255 0–100% Red 5 000 ó...
Operation DMX Values (cont.) 10Ch Channel Function Value Percent/Setting 000 ó 255 0–100% Dimmer 000 ó 255 0–100% 000 ó 255 0–100% Green 000 ó 255 0–100% Blue 000 ó 255 0–100% Amber 000 ó 010 No function Strobe 011 ó 255 Slow to fast 000 ó...
Operation DMX Values (cont.) 6 Ch Channel Function Value Percent/Setting 000 ó 255 0–100% Dimmer 000 ó 255 0–100% 000 ó 255 0–100% Green 000 ó 255 0–100% Blue 000 ó 255 0–100% Amber 000 ó 010 No Function Strobe 011 ó...
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
Technical Information Technical Specifications Dimensions and Length Width Height Weight Weight 41 in (1041 mm) 3.2 in (82 mm) 6.5 in (164 mm) 10.6 lb (4.8 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (internal)
(954) 577-4455 Email: tech@chauvetlighting.com Fax: (954) 929-5560 Toll free: (800) 762-1084 www.chauvetlighting.com World Wide Web UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd. General Information Technical Support Address: Unit 1C Email: uktech@chauvetlighting.com Brookhill Road Industrial Estate Pinxton, Nottingham, UK www.chauvetlighting.co.uk...