Sound Management - Bush VL19HDLED Instruction Manual

Standard features
Simple everyday use
Picture Mode
Allows the selection of a picture-enhancement technical
from among the following options: Dynamic / Standard
/ Mild / Personal.
Brightness
This item can adjust the optical fiber output of the entire
picture; it will affect the dark region of the picture.
Contrast
This item can adjust the highlight intensity of the picture,
but the shadow of the picture is invariable.
Sharpness
This item can adjust the peaking in the detail of the
picture.
Saturation
This item can adjust the saturation of the colour based
on your own like.
Hue
This item may use in compensating colour changed
with the transmission in the NTSC code.
Colour Temp
This item can increase or reduce warm colour of the
picture personally (red), and the cold colour (blue)
according to your like. The choice of Cold, that means
it will increase the blue tone for the white. But choosing
the Warm, it will increase the red colou r for the white.
Aspect Ratio
Allows you to watch the screen in various picture
formats: 4:3 / Full / Zoom1 / Zoom2.
Screen Mode
Select the HDMI signal screen mode:Auto /Vedio / PC.
Advanced Settings
• NR(Noise Reduction): Reduces the noise level of the
connected device (Medium / Strong / Off / Weak).
• Dynamic Contrast: Adjusts the dynamic contrast
(Medium / Strong / Off / Weak).
4. Press the EXIT button to exit menu.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.

Sound management

1. Press the MENU button to display the main menu.
Press the buttons to select Sound in the main menu,
then press the or OK button, it will highlight the first
option.
2. Press the  buttons to select the option you want
to adjust in Sound menu.
3. Press the buttons to change the following
settings.
TIPS:
• You can change the value of treble and bass when the
sound is in Personal mode.
• You can press the S.MODE button on the remote
control to change the Sound Mode directly.
Sound
Sound Mode
Treble
Bass
Balance
Surround Sound
EQ Setting
AVL
SRS Setting
Move A d u j t s
Sound Mode
Allows the selection of an audio-enhancement technical
from among the following options: Standard, Music,
Movie and Personal. You can change the value of Treble
and Bass when the sound is in Personal mode.
Treble
Controls the relative intensity of higher-pitched sounds.
Bass
Controls the relative intensity of lower-pitched sounds.
Balance
Adjusts the relative volume of the speakers in a multiple
speaker system.
Surround Sound
This creates a feeling fitted to your TV when switched
on and SRS Setting is off.
EQ Setting
Allows the selection of an equalizer mode: Off / Rock /
Pop / Jazz / User. You can change the EQ value under
User mode.
Standard features
Standard
0
0
0
Off
Off
Off
M E N : U R e u t n r E I X : T E t i x
31