Cleaning Protocol; Warning; Disinfection - promotal Ocea 2390 Series User Manual

Cleaning protocol

Warning

You must read the installation instructions, technical
instructions, and instructions for use before
handling this equipment. The instrument must be
used only for the specifi c purpose for which it is
designed, and which is described in our literature.
The assembly and connection to the mains must be
Any modification of the DM without the manufacturer's written authorisation
is prohibited.
Caution
Only those accessories allowed and provided by Promotal for this DM may be
used.
Cleaning structure
The steel structure of OCEA is treated anti-
corrosion paint front to strengthen its protection in
the context of a use in damp environments.
For as much, OCEA is in no way intended to be :
– washed
– Washed in big waters, in the jet or in
the shower head
– Washed with a high pressure cleaner
Any corrosion consecutive to a washing not followed by drying shall not be subjected to any decision
under warranty on the part of PROMOTAL.
Any abrasive product is to outlaw for the cleaning of painted components and stainless steel.
Cleaning the tub
It is advised to clean the mattress and the tray of the
trolley gives a shower after every use.
It is recommended to wipe the tray after cleaning.

Disinfection

This Medical Device must be the subject of a regular
disinfection by means of products that meet the
definition of Bactericide, Virucide and fungicide.
8
carried out by qualifi ed personnel.
Under no circumstances must electrical parts
(motor, unit housing the electrical control systems,
control unit, adaptor etc.) be opened. PROMOTAL
cannot be held responsible for any damage resulting
from the instructions not being followed.
In effect, its structure mechanic welded non-
waterproof has areas of water retention not
compatible with this mode of washing.
If, in an exceptional way, a washing to the jet must
be achieved, it is imperative to proceed then drying
to a complete and effective of the structure, ideally
by blowing air.
Do not use abrasive products of type « cleaning
creams ».
Use only liquid products (liquid soap).
The products detergents/disinfectants used in
medical devices are adapted under reservations of
the observance of the recommendations for use of
their manufacturer. They must be usable on painted
surfaces in epoxy-polyester or stainless steel.
User's Guide