Table of Contents
Advertisement
Recommendations
We advise you to follow the instructions below.
Connecting the hose
The trolley is equipped with an evacuation hose with an
internal Ø of 50 mm and an external Ø 59 mm.
Install the trolley gives a shower so that the
evacuation situated at the foot of the patient is
placed above :
- Of a receptacle of waste water planned for
that purpose
or - of a siphon of ground
or - of a shower tray, a bathtub, a bidet ...
After using the trolley, place the hose in the storage
space.
Use
Empty the contents of the tub by removing the
plug, before lowering the barriers.
Caution
Do not move the shower trolley
when filled with water as a
change in direction, acceleration
or bracking will spill liquid on the
ground, a potential source of
accidents.
Advice
Lock brakes so that the trolley gives a shower is
perfectly motionless.
Adjust by means of the pedal the height of the
trolley gives a shower so as to optimize the working
conditions.
For security reasons, it is recommended that 2
people be present for the bathing of patients. In this
case, the patient may be placed on its side.
Caution
The side barriers are barriers of
protection, on no account the
patient has to take support above
during the toilet.
12
The shower trolley is designed to be used with
soapy water. No other products should be used.
The ended toilet, the patient can be dried and
dressed on the trolley gives a shower.
Caution
It is forbidden to place a patient
against the barriers, as to do so
could damage the barriers or may
cause the patient to fall.
User's Guide
Advertisement
Table of Contents
