Dl3678-2 Stereo Compressor Limiter - Calrec M3 Operator's Manual

M3
............................................................................................................................... . ...................................................
DIL SWITCH SETTINGS - DL3678-2 STEREO COMPRESSOR LIMITER
SW2 "M" detection:-
DOWN
UP
The compressor and limiter normally respond to the higher of the left and right
signals. SW2 allows the mono reduction of left and right (-3dB) to take control if
the stereo coherence is such that this exceeds left or right. This renders it
unnecessary to "under-drive" the stereo outputs to guard against the possibility
of a higher than desired mono level.
96
= OFF.
= ON = Detection of reduced mono
signal into side chain.
Standard default setting