Zn5210 1Ru External Power Supply Unit - Calrec M3 Operator's Manual

M3
...............................................................................................................................................................................

ZN5210 1RU EXTERNAL POWER SUPPLY UNIT

A Calrec designed PSU to provide +18 volts audio power, 9 volts logic
power (stabilised in modules to 5 volts where required) and 48 volts phantom
power. It is recommended that there be a second external power supply in
the system to act as a "Hot" spare which in addition will share the load.
The 1U units operate in parallel via internal diodes and are designed to operate
at mains voltages 10% below that set.
IEC
Please note :
T3.15A
STABS
230V AC
115V AC
ZN5210 POWER SUPPLY
The small frame M3 is supplied with an internal Power
Supply Unit. Should an external Power Supply Unit be used
as a "hot" spare for this, then load-sharing will not occur.
1.5A
5A
5A
5A
MON
48V
+18A
-18A
CR
9L
0L
MON
77