Calrec M3 Operator's Manual page 87

M3
...............................................................................................................................................................................
Mono Groups have the option of being fed with either a mono mix signal or a Left /Right
split to pairs of group mono modules. Left signal going to positions 1 & 3, Right to 2 & 4.
L/R Input Mix ON
L/R split to gps 1&3 / 2&4 SW 2
When Aux 1 PA Inhibit is enabled, it allows a signal only to be fed to the audience PA
system only whilst the fader is open.
Aux 1 PA Inhibit enabled
to follow fader
Aux 1 PA Inhibit not
selected
Each group has the option of sending to a Direct Output. The signal can be set internally
to be either pre or post fader.
Direct Output - Post fader
Direct Output - Pre fader
SW 2 1 - ON
2 - ON
1 - OFF
2 - OFF
SW 7 1 - ON
2 - OFF
SW 7 1 - OFF
2 - ON
SW 13 1 - ON
2 - OFF
SW 13 1 - OFF
2 - ON
Standard default settings
Standard default settings
Standard default settings
87