Dl3678-2 Stereo Compressor/Limiter - Calrec S2 Operator's Manual

Table of Contents

Advertisement

S2
.............................................................................................................................................................................................................................................

2.28 DL3678-2 STEREO COMPRESSOR/LIMITER

Stereo Limiter:
Ratio
Threshold
Attack
Recovery
Peak Limit
Limiter
Stereo Compressor:
Ratio
Threshold
Attack
Recovery
Make-up Gain
Voice-over
Compressor
Compressor & Limiter:
Bargraph
Links
DYN-IN
Balanced line input & outputs, 0dBu.
Ignore right channel for mono use.
The compressor and limiter normally respond to the higher of the left
and right signals. An internal option allows the mono reduction of left
and right (-3dB) to take control if the stereo coherence is such that
this exceeds left or right. This renders it unnecessary to "under-drive"
the stereo outputs to guard against the possibility of a higher than
desired mono level.
-2
:
fixed 100/1
:
-4/+16dBu variable
:
fixed 100 u-secs
:
0.075 to 4 secs variable with AUTO facility:
0.1 to 1.5 secs (programme dependent)
:
Yellow LED indicator
:
On button with Yellow LED indication
:
1.5/10 variable
:
-20/+10dB variable
:
Normal 4 msec @ 5:1 or FAST 0.2mS @ 5:1
:
0.1 to 4 secs variable with AUTO facility:
0.1 to 1.5 secs (programme dependent)
:
0/20dB variable
:
Line level balanced input
(may be used when compressor is Off)
:
ON button with Yellow LED indicator
:
Up to 24dB gain reduction with enhanced
resolution at lower reduction levels.
:
Button 1 & 2 to external buss or pairs etc - links
side chains together.
:
Button with Red LED indication - when OUT
gives total bypass condition except that
bargraph operates as a preview at reduced
intensity.
41

Advertisement

Table of Contents
loading

Table of Contents