Calrec M3 Operator's Manual page 2

M3
............................................................................................................................... . ...................................................
©
2002 Calrec Audio Ltd. All Rights Reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying & scanning, for any purpose other than for use by the
registered purchaser, without the prior written consent of Calrec Audio Ltd.
Whilst the Company take the utmost care in ensuring that all details in the publication are correct
at the time of publication, we are constantly striving for improvement and therefore reserve the
right to alter specifications & equipment without notice.
This publication is for International usage.
Please also refer to the User Registration page at the end of this manual.
Please observe the following:-
After Sales Modifications.
Modifications to this equipment by any party other than Calrec Audio Limited may invalidate EMC
and safety features designed into this equipment. Calrec Audio Limited can not be liable for any
legal proceedings or problems that may arise relating to such modifications.
If in doubt, please contact Calrec Audio Limited for guidance prior to commencing any such work.
ESD (Static) Handling Procedures.
n its completed form, this equipment has been designed to have a high level of immunity to static
I
discharges. However, when handling individual boards and modules, many highly static sensitive
parts are exposed, therefore in order to protect these devices from damage and to protect your
warranty, please observe static handling procedures (e.g. use an appropriately grounded anti-
static wrist band).
All modules and cards should be returned to Calrec Audio Limited in anti-static wrapping.
Calrec Audio Limited can supply these items upon request, should you require assistance.
This applies particularly to digital products due to the types of devices and very small geometries
used in their fabrication, analogue parts can, however, still be affected.
2