My4994 / My4994-2 Meter Selector - Calrec M3 Operator's Manual

M3
............................................................................................................................... . ...................................................
DIL SWITCH SETTINGS - MY4994 / MY4994-2 METER SELECTOR
The meter selector can be set to automatically switch the metering to M/S when a mono
source is selected. (The M/S switch LED will also illuminate on the front panel)
M/S switching AUTO
M/S switching OFF
The meter selector can be set to automatically reduce the metering of the mono signal by -
3dB when a mono source is selected. This will bring the mono and stereo signals in line
with each other at 0dB.
-3dB automatic reduction SW 16
Mono signal unchanged
Mono M & S can be either set for -3dB mix or -6dB
98
Standard default
settings
MY812-324
SW 16 1 - ON
SW 16 1 - OFF
2 - ON
SW 16 2 - OFF
SW 15 OFF = M - 3
ON = M - 6
OFF ON
SW16
AUTO M/S
ON MONO SELS
AUTO M-3
ON MONO SELS
2
1
SW15
Standard default setting
Standard default setting
Standard default setting
ON
OFF