Pq5122 Mono Mic/Line Dual Input Channel - Calrec M3 Operator's Manual

M3
............................................................................................................................... . ...................................................
DIL SWITCH SETTINGS - PQ5122 MONO MIC/LINE DUAL INPUT CHANNEL
Standard default
settings
80
Mono channel 2nd Input can be internally set to
either Mic or Line. (Selection of either Input 1 or 2 is
done via a switch on the front panel).
MIC SW 19
SW 38
LINE SW 19
SW 38
Each channel can have the alignment Tone to the
mic gain control internally set to be either
continuously enabled or to follow the Transmission /
Rehearsal logic
Tone - Permanently enabled SW 38 4 - ON
Tone - Follows Tx / Reh logic SW 38 4 - OFF
(default)
1 - ON
2 - OFF
3 - ON
Standard default
4 - OFF
1 - ON
2 - OFF
3 - ON
1 - OFF
2 - ON
3 - OFF
4 - ON
1 - OFF
2 - ON
3 - OFF
settings