Ml4953 Monitor 2 - Calrec M3 Operator's Manual

M3
...............................................................................................................................................................................

ML4953 MONITOR 2

LEVEL BARGRAPH
METER SELECTOR - 12 way selector with the following sources:
TONE
LS
AUX 1
AUX 2
AUX 3
AUX 4
APFL
MONO 1/2
MAIN 1 DESK
MAIN 1 LINE
MAIN 2 DESK
MAIN 2 LINE
PFL
STUDIO LS LEVEL
STUDIO LS MONITOR SELECTOR, 4 way selector with the following sources:
2 External sources
LS
DESK
CUT button
STB button
HEADPHONE socket for headphone
monitoring.
: Displays level of right channel of meter select output (internally
selectable for PPM/VU and 0dB reference level).
: Sends line up tone to meters, Red LED.
: Follows control room monitor selector, Green LED.
: Mono aux 1 to left meter, Green LED.
: Mono aux 2 to left meter, Green LED.
: Mono aux 3 to left meter, Green LED.
: Stereo aux 4 to both meters, Green LED.
: AFL plus PFL, Green LED.
: Main outputs 1 & 2 to meters, Green LED (main 1 to left meter,
main 2 to right meter).
: Green LED.
: Green LED.
: Green LED.
: Green LED.
: Pre Fade Listen level control to PFL loudspeaker.
: Sets studio loudspeaker level.
: EXT 1 and EXT 2, Red LEDs.
: Follows control room monitor selector, Red LED.
: Main 1 desk output, Red LED.
: Cuts studio loudpeaker, Yellow LED (may also be cut by the SLS
logic system).
: Studio Talkback - Momentary, selects desk Talkback to studio
loudspeaker.
61