Xl5125 Mono Group - Calrec M3 Operator's Manual

Table of Contents

Advertisement

M3
............................................................................................................................... . ...................................................

XL5125 MONO GROUP

Group routing to 2 main Stereo outputs.
Group direct input routing to 2 main Stereo outputs to group mixer.
Aux 1-3 from direct button switches aux 1-3 to group direct input.
Direct AFL
Direct PFL
Direct CUT
Direct PAN
Direct Gain
Direct output gain control 10dB in hand (direct output can be internally selected pre or post fader)
TB
TONE
Aux 4
Aux 1-3
L/R
Scribble strip
INS
CUT
AFL
Peak
3 LEDs
ON
PFL
Fader
Mono groups can be internally selected to be fed with either a mono mix signal or a left/right split to
pairs of group mono modules. Left to groups 1+3, right to groups 2+4.
52
:
Latching button routes direct input after fader signal exclusively to monitor
loudspeaker.
:
Latching button routes direct input pre fader signal to small PFL loudspeaker.
:
Latching button cuts direct input signal.
:
Pans Mono direct input signal between left & right outputs.
:
Sets direct input signal level, 10dB in hand.
:
Talkback button to direct output
:
To direct output, inhibited ON AIR
:
Stereo output to aux 4 buss, selectable pre or post fader and on/off. Follows
channel pan.
:
Mono outputs to aux 1 to 3 busses with individual level , pre/post and on/off
controls.
:
Left/right pan selected by PAN button.
:
Selects insert circuit (pre fader).
:
Latching button (Yellow LED) cuts all pre and post signals except insert send and
PFL.
:
Latching button routes channel left/right signal in Stereo to the AFL mix which is fed
to the monitor loudspeakers, automatically overriding the normal feed.
:
Red LED illuminates when the signal anywhere in the module is within 3dB of
clipping.
:
Displays pre EQ signal level relative to 0dBu.
:
Green LED illuminates to show channel fader open.
:
Latching button routes pre-fader channel signal to the small PFL loudspeaker
(with internal option to inject into the main monitor chain).
:
10dB in hand

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents