JLG TOUCAN 8E Service And Maintenance Manual page 123

Joystick signal output for system interpretation:
Description
Voltage for the minimum drive
forward / swing right position (+1%)
Voltage for the maximum drive for-
ward / swing right position (+100%)
Voltage for the minimum drive
reverse / swing left position (-1%)
Voltage for the maximum drive
reverse / swing left position (-100%)
3. Membrane Switches
The DOS and Horn switches are made of membrane
switches:
Each push button is a SPST switch; switch ON = 15 to 25 
(circuit impedance, measured on the ribbon connector).
31210090
Default
Calibrated Value
Value
CENTER + 0.15V
2.65V
FWD TO MAX -0.05V
4.45V
CENTER -0.15V
2.35V
REV TO MAX +0.05V
0.55V
SECTION 8 - CONTROL COMPONENTS
– JLG Lift –
8-23