Sample Setup - Casio E-CON2 Use Manual

k Sample Setup
The Sample Setup screen lets you configure a number of settings that control sampling.
u u u u u To configure Sample Setup settings
1. While the Advanced Setup menu (page 3-1) is on the display, press c(Sample).
• This displays the Sample Setup screen.
2. To change the sampling mode setting, use the f and c cursor keys to move the
highlighting to "Mode". Next, press 1(MODE) to display a mode selection menu.
• Note that the mode you select also determines the channel(s) you can use.
To do this:
Graph data in real-time as it is sampled
Perform sampling of high-speed phenomena (sound, etc.)
Perform sampling over a long time (weather, etc.)
• The EA-200 enters a power off sleep state while stand-
ing by.
Perform periodic sampling, from a start trigger event to
an end trigger event
Output from the speaker sound sampled with the micro-
phone
Record the time of the occurrence of a particular trigger
event as an absolute value starting from 0, which is the
sampling start time
Perform sampling other than that described above
3. To change the sampling interval setting, move the highlighting to "Sampling Interval".
Next, press 1 to display a dialog box for specifying the sampling interval.
• The range of values you can select depends on the current sampling mode setting.
If this sampling mode is selected: This is the allowable setting range:
Realtime
Fast
Extended
Period
Sound
Clock
Normal
3-4
Using Advanced Setup
Currently selected item
0.3 second to 299sec
20usec to 500usec
5 minutes to 4hours
"=Trigger" only (no value input required)
20usec to 27usec
"=Trigger" only (no value input required)
500usec to 299sec
20021201
Sample Setup Screen
Select this Selectable
mode: Channel(s)
Realtime CH1-3, SONIC
Fast CH1, Mic
Extended CH1-3, SONIC
Period CH1
Sound Mic
Clock CH1
Normal CH1-3, SONIC