Graph Setup - Casio E-CON2 Use Manual

7. Press one of the function keys described below.
To select this type of edge:
Falling
Rising
8. Press w to finalize Trigger Setup and return to the Advanced Setup menu (page 3-1).
u u u u u To configure PhotoGate trigger start and end settings
Perform the following steps when CH1 is selected as a Photogate trigger source.
1. Move the highlighting to "Start to".
2. Press one of the function keys described below.
To specify this PhotoGate status:
PhotoGate closed
PhotoGate open
3. Move the highlighting to "End Gate".
4. Press one of the function keys described below.
To specify this PhotoGate status:
PhotoGate closed
PhotoGate open
5. Press w to finalize Trigger Setup and return to the Advanced Setup menu (page 3-1).
k Graph Setup
Use the Graph Setup screen to configure settings for the graph produced after sampling is
complete. You use the Sample Setup settings (page 3-4) to turn graphing on or off.
u u u u u To configure Graph Setup settings
1. While the Advanced Setup menu (page 3-1) is on the display, press e (Graph).
• This displays the Graph Setup screen.
3-8
Using Advanced Setup
Currently selected item
20021201
Press this key:
1(Fall)
2(Rise)
Press this key:
1(Closed)
2(Open)
Press this key:
1(Closed)
2(Open)
Graph Setup Screen