Using Setup Memory; Saving A Setup - Casio E-CON2 Use Manual

6 Using Setup Memory

You can use setup memory to save EA-200 setups you configure using Setup Wizard or
Advanced Setup in calculator memory for later recall when you need them.
k Saving a Setup
A setup can be saved when any one of the following conditions exist.
• After configuring a new setup with Setup Wizard
See step 8 under "To configure an EA-200 setup using Setup Wizard" on page 2-2.
• After configuring a new setup with Advanced Setup
See step 6 under "To configure an EA-200 setup using Advanced Setup" on page 3-1 for
more information.
• While the E-CON2 main menu (page 1-1) is on the display
Performing the setup save operation while the E-CON2 main menu is on the display saves
the contents of the current setup memory area (which were configured using Setup Wizard
or Advanced Setup).
Details on saving a setup are listed below.
u To save a setup
1. Start the save operation by performing one of the function key operations described
below.
• If the Advanced Setup menu (page 3-1) is on the display, press 3(MEM).
• If the E-CON2 main menu (page 1-1) is on the display, press 2(MEM).
• Performing any one of the above operations causes the setup memory list to appear.
• The message "No Setup-MEM" appears if setup memory is empty.
6-1
Using Setup Memory
20021201