Casio E-CON2 Use Manual page 20

• Next, the EA-200 calculates liner interpolation for the first set of values (reference and
sampled), and the second set of values, and automatically inputs them for the slope and
intercept values of the custom probe. The Edit Slope screen appears on the display with
the new values.
8. Use the f and c cursor keys to move the highlighting to "Unit Name", and then press
1(Edit) to display a dialog box for inputting up to eight characters for the unit name.
9. Press w, and then input a memory number from 1 to 99.
• This saves the custom probe setup and returns to the custom probe list, which should
now contain the new custom probe.
k Managing Custom Probe Setups
Use the procedures in this section to edit and delete existing custom probe setups.
u To edit a custom probe setup
1. Display the Custom Probe List.
2. Select the custom probe setup whose configuration you want to edit.
• Use the f and c cursor keys to highlight the name of the custom probe you want.
3. Press 3(EDIT).
• This displays the screen for configuring a custom probe setup.
• To edit the custom probe setup, perform the procedure starting from step 5 under "To
configure a custom probe setup" on page 4-1.
u To delete a custom probe setup
1. Display the Custom Probe List.
2. Select the custom probe setup you want to delete.
• Use the f and c cursor keys to highlight the name of the custom probe setup you
want.
3. Press 4(DEL).
4. In response to the confirmation message that appears, press w to delete the custom
probe setup.
• To clear the confirmation message without deleting anything, press i.
4-3
Using a Custom Probe
20021201