Casio E-CON2 Use Manual page 27

u To convert setup data to a program and transfer it to a CFX-9850 Series/
fx-7400 Series calculator
1. Connect the scientific calculator (CFX-9850 Series or fx-7400 Series) to the ALGEBRA-
FX Series calculator.
• Perform the necessary procedure on the scientific calculator to set it up to receive data.
2. Perform steps 1 and 2 of the procedure under "To convert a setup to a program" on page
7-1.
3. Press 1 (TRNS). On the submenu that appears, specify the type of scientific calculator
(b: FX9850 or c: fx7400) for which you want to configure a program.
• Program conversion and transfer starts as soon as you specify a calculator model.
• The message "Complete!" appears when conversion is complete.
Important!
• A program configured using Program converter makes it possible to perform sampling
that is identical to that performed using the original setup. This is true except when you
convert to a CFX-9850 Series or fx-7400 Series calculator program.
Note
• When you convent setup data to a CFX-9850 Series or fx-7400 Series program, any
sample value storage list number greater than 5 is changed to 5.
• CFX-9850 Series or fx-7400 Series calculators support up to six lists only.
• List 6 is used for EA-200 setup.
7-2
Using Program Converter
20021201