Casio E-CON2 Use Manual page 17

2. To change the graph source data name display setting, use the f and c cursor keys
to move the highlighting to "Graph Func". Next, press one of the function keys described
below.
To specify this graph source data name display setting:
Display source data name
Hide source data name
• When the graph data is stored in a sample data memory file, the file name appears as
the source data name. When the graph data is stored in current data area, the channel
name appears.
3. To change the trace operation coordinate display setting, use the f and c cursor keys
to move the highlighting to "Coord". Next, press one of the function keys described below.
To specify this coordinate display setting for the trace operation:
Display trace coordinates
Hide trace coordinates
4. To change the numeric axes display setting, use the f and c cursor keys to move the
highlighting to "Econ Axes". Next, press one of the function keys described below.
To specify this axes display setting:
Display axes
Hide axes
5. To change the real-time scroll setting, use the f and c cursor keys to move the
highlighting to "RealScroll". Next, press one of the function keys described below.
To specify this real-time scrolling setting:
Real-time scrolling on
Real-time scrolling off
6. Press w to finalize Graph Setup and return to the Advanced Setup menu.
Note
• For details about sample data memory and current data area, see "9 Using Sample Data
Memory".
3-9
Using Advanced Setup
20011101 20021201
Press this key:
1(On)
2(Off)
Press this key:
1(On)
2(Off)
Press this key:
1(On)
2(Off)
Press this key:
1(On)
2(Off)