Charging The Battery; Connecting The Battery Charger; Charging Process; Led Displays During The Charging Process - Sunrise Medical Quickie Attitude Directions For Use Manual

Charging the battery:

Fully charge the battery before its first use. The battery
capacity upon delivery is generally 30%. The battery can be
charged at any capacity without adversely impacting its service
life. The battery achieves its maximum service life when it is
charged at an ambient temperature of between 10 °C and 30
°C

Connecting the battery charger:

The battery [1] does not need to be removed from the Pedelec
for charging, it can stay
where it is. Only the motor cable plug [9] needs to be removed
(see section 4.2). Then,
proceed as before.
•• Insert the plug [9] of the battery charger into the socket [3]
on the battery.
•• The two parts are correctly aligned and interlocked
automatically by means of a
Magnetic latch.
•• Carry out the charging process according to the
specifications in the charger operating manual. In addition,
follow the instructions on the charging process given in section
2.3.
Before inserting the plug [6] in the socket [3], ensure
that both parts are clean and there are no metallic
particles on them. If you detect such particles, use a
dry and clean cloth to remove them.

Charging process:

When charging the battery follow the instructions of
the charger operating manual.
Also observe the safety information and precautions
provided in section 6.

LED displays during the charging process:

The following table shows the LED display [5] of the battery
during charging.
LED lights Steadily
50
Fig.7.8
Fig.7.9
LED Flashes
3
9
e
d
c
b
a
Battery Charge
Fully Charged 100%
Attitude/Attitude Hybrid Rev.3.0